CAR LED HEADLIGHTS
Plug-in LED headlight kits that replace a tired factory halogen bulb with 21,600 lumen of focused, flip-chip light — without rewiring your car. Designed in the USA, CE & RoHS certified, and covered for 18 months.
Peak Output
21,600 LM
21,600 LM
Per set
180W
90W per bulb
9–16V
12V systems
18 Months
Warranty
Why upgrade to LED
You see sooner
A factory halogen throws roughly 1,200 lumen. At 21,600 lumen per set, obstacles, speed breakers and unlit turns resolve well before you reach them.
Focused, not scattered
The flip-chip source sits where the halogen filament used to, so the reflector keeps its beam shape instead of spraying glare at oncoming traffic.
It stays bright
Halogen filaments dim steadily as they age. LEDs hold their output, and this kit is backed for 18 months against defects either way.
Halogen vs Unique LED
Halogen figures are typical values for a factory 55W bulb and vary by vehicle. Unique LED figures are the manufacturer's rated output as printed on the box.
The kit
Car Unique LED Headlight Kit - 21,600 LM
- 2 × LED bulbs — 90W and 10,800 LM each
- 2 × ballast drivers
Will it fit my car?
Headlight bulbs are sold by base type, not by car model. Check your owner's manual, or pull the bulb out and read the code moulded into its base — this kit fits the H4 base. Send us that code with your car's make, model and year and we will confirm fitment before you order.
H4
Hi + Lo, one bulb
Not sure which one you have?
Message us your car's make, model and year. We will tell you the bulb type and whether this kit suits it — including when the answer is no.
Fitting it, step by step
Switch off and let it cool
Park, turn the headlights off and give the housing a few minutes. Halogen bulbs run hot enough to burn.
Remove the old bulb
Open the dust cap behind the headlight, unclip the connector and release the retaining clip. The halogen bulb lifts straight out.
Seat the LED and its driver
Drop the LED into the same slot, refit the clip, then plug the ballast driver in between the bulb and the car's connector. Mount the driver somewhere dry with a little airflow.
Test and aim
Switch on, check both sides light up, and confirm the cut-off line sits level against a wall. Rotate the bulb in its slot if the pattern looks off, then refit the dust cap.
Aim matters. A bright bulb pointed too high dazzles oncoming traffic and lights up less of the road. If you are not confident checking the cut-off yourself, any workshop will set it in a few minutes.
Headlight questions
Do I need to modify my car's wiring?
expand_more
No. The kit plugs into the existing headlight connector through the supplied ballast driver. Nothing is cut, spliced or drilled.
Why 4300K warm white?
expand_more
4300K warm white is closer to daylight with a slightly warm cast. It cuts through rain, dust and fog better, which suits most Indian road conditions.
Will it work in a projector housing?
expand_more
It fits both reflector and projector housings that use an H4 bulb base. Projectors generally give the cleaner cut-off of the two. Tell us your car and housing type and we will confirm before you order.
Is it waterproof?
expand_more
The bulb sits inside a sealed headlight housing and tolerates the humidity and splash it sees there. It is not rated for submersion, and water ingress beyond normal operating tolerance is not covered by the warranty — so mount the ballast driver somewhere dry.
What is in the box?
expand_more
- 2 × LED bulbs — 90W, 10,800 LM each
- 2 × ballast drivers
How long does delivery take?
expand_more
Free pan-India shipping on every order. Dispatch is within 2–3 business days and delivery usually lands 3–7 business days after that. Full detail on the Shipping & Return Policy page.
Brighter headlights. Safer night drives.
Free pan-India shipping · 18-month warranty · CE & RoHS certified · Fitment confirmed before you buy.
Shop the Kit